Products
- Other Cutting & Forming Tools[1]
- Tool Holder[1]
- Metal Processing Machinery Parts[7]
- Metallurgy Machinery Parts[2]
- Mining Machinery Parts[3]
- General Mechanical Components Stock[1]
- Moulds[5]
- Other Mechanical Parts[8]
- Cast & Forged[1]
- Other Metals & Metal Products[10]
- Tungsten Bars[8]
- Tungsten Foil[10]
- Tungsten Pipes[7]
- Tungsten Sheets[4]
- Drill Bit[1]
- Saw Blade[1]
- Tool Parts[7]
Contact Us
- Contact Person : Ms. Jia Jackie
- Company Name : Zhuzhou Uko Cemented Carbide Co., Ltd.
- Tel : 86-731-28339730
- Fax : 86-731-28337210
- Address : Hunan,Zhuzhou,NO.1403,Building 15,Yufeng Garden,No.23,Xianfeng Road,Shifeng District,Zhuzhou,Hunan,P.R.China
- Country/Region : China
Product Detailed
Related Categories:Tungsten Foil
Related Product Searches:Carbide Rolls in Tools,High Quality,carbide rolls, solid carbide tools,Metal production
Carbide Rolls in Tools
OEM and ODM Service
ISO9001 Certification
100% virgin raw material
Trial order supported
Related Product Searches:Carbide Rolls in Tools,High Quality,carbide rolls, solid carbide tools,Metal production
Carbide Rolls in Tools
Carbide Rolls is widely used as seal faces with resistant-wearing, high fractural strength, high thermalconductivity, small heat expansion co-efficient. It is the best material to resist heat and fracture in all hard face materials.
ROLLERS FOR COLD ROLLING RIBBED BARS | |||||
GRADE AND SPECIFICATION OF ROLLERS | |||||
GRADE | MECHANICAL PROPERTIES | ||||
DENSITY G/CM3 | HARDNESS | TRS | |||
YGH30 | 14.02 | 84.9 | 2700 | ||
YG15 | 14.28 | 86.8 | 2500 | ||
STANDARD TUNGSTEN CARBIDE ROLL DIMENSION | |||||
WIRE RANGEΦ | (OD)ΦMM | (ID)ΦMM | (T)MM | ||
4-8.5 | 125 | 82 | 15 | ||
9~12 | 125 | 82 | 20 | ||
4-8.5 | 140 | 90 | 15 | ||
9~12 | 140 | 90 | 20 | ||
4-8.5 | 150 | 90 | 15 | ||
9~12 | 150 | 90 | 20 | ||
Other types of rollers may be offered according to customers' requirement. | |||||
Application requirements of dimensional cemented carbide roll rings | |||||
1. Any striking on and collision with roll rings is strictly prohibited. | |||||
2. When installing the whole assembly of roll rings, the clearance of the bearings in relation to the casings should be on | |||||
the tighter side . | |||||
3. The precision of rotation of the whole assembly ( circular runout and end runout ) should be kept within ±0.05mm. | |||||
4. The fitting -in of the whole assembly and the roll rings shall be a transitional fitting -in and fastened. | |||||
5. The roll rings should not be cooled by water or oil water emulsion. | |||||
6. The joints of the pipes in the internal cooling system should not be leaky and it is advisable that no cooling is | |||||
applied. |
Carbide Rolls in Tools